Free course
Certification
Basic
Safe Practices: Working on the Vehicle
How to work on a modern vehicle without hurting yourself, the vehicle, or the person who drives it later. Battery and airbag safety, panel removal without damage, drilling and sealing, the mounting hierarchy with the pros and cons of each method, lifts and shop safety, and the factory provisions every installer should know before picking up a drill.
9 lessons
1 hour 47 minutes
Lesson quizzes
2 enrolled
| Responsible | Joe Manno |
|---|---|
| Last Update | 09/21/2026 |
| Completion Time | 1 hour 47 minutes |
| Members | 2 |
Discuss this course
Stuck on a step, or found a better way to do it? Ask the network or share what works.
Shop Floor
Basic
-
Before You Touch It2Lessons · 26 min
-
Preview New 10 xp
-
Taking It Apart: Trim, Clips and the Photographs That Save YouNew 10 xp
-
-
Drilling, Mounting & Sealing2Lessons · 29 min
-
The Mounting Hierarchy, and the Zone Nothing Gets Mounted InNew 10 xp
-
Drilling and Sealing: Roofs, Pillars, Firewalls and the Hole That Grounded a FleetNew 10 xp
-
-
Shop Safety2Lessons · 25 min
-
Lifts, Jacks and Weight: The Vehicle Changes While It Is in the AirNew 10 xp
-
PPE, Fire, Heat Sources and the Organised BayNew 10 xp
-
-
Vehicle-Specific Awareness2Lessons · 27 min
-
Reading the Upfitter Guide: What the Factory Already Built for YouNew 10 xp
-
Modern-Vehicle Traps: Sensors, Shutters, Keys and SoftwareNew 10 xp
-
-
Certification1Lessons ·
-
Certification exam: Safe PracticesNew
-